A person’s body (including the face) takes on a negative electrical charge when they touch the main switch and grounding plate. The veil has a positive charge, so it attaches to the face.

The VEIL EFFECTOR is specially developed to form the ideal veil with the fiber. You can not create the veil properly in case you use another essence. Please use the VEIL EFFECTOR.

If you use the BIOMIMESIS VEIL during the daytime, it may cause the veil to peel off because it could come in contact with hands or clothes. We recommend using the BIOMIMESIS VEIL only at night thoroughly, and you can see the skin differences and benefits the following morning.

Please use the facial mask at any of the steps before the VEIL EFFECTOR.

We don’t recommend applying make-up on the BIOMIMESIS VEIL. Please use the BIOMIMESIS VEIL as the last step of night-time skincare.

When you set the mode switch to 1, you can spray little by little. In normal usage, please set the mode switch to 2.

Spray at a distance of approx. 8 cm (the width of a fist) from your face.
Use in the recommended environment, with temperatures between 15-35 ℃, and humidity between 25-75 %.

It won’t cause nozzle blockages or battery reduction. However, if you accidently press the main switch when the mode switch is set to anything other than 0, it may cause the VEIL POTION to leak or cause static electricity. Please make sure you set the mode switch to 0(OFF) after use.

The amount of the VEIL EFFECTOR or spraying of the VEIL POTION may not be enough. Please use the appropriate amount of the VEIL EFFECTOR (2-3 pushes) and the VEIL POTION (approx. 30 seconds for each cheek).

To avoid the veil getting into the eyes, please don’t use around the eyes. Please use the included eye guard when spraying.

The veil cannot be sprayed on another person. Please use only on yourself. Due to the product specification, the veil attaches to the person who is touching the main switch.

Please gently wipe them with a dry cloth or tissue. Please don’t wash the VEIL DIFFUSER and don’t wipe it with a wet cloth because it may cause damage to the VEIL DIFFUSER. In addition, if you wipe them with liquid including ethanol etc., it may cause the device coating to come off or crack.

Leaving it unused for a long period of time may cause it to dry out and become clogged. After pressing down the VEIL POTION nozzle, please use all the contents promptly (within approx. 3 months).
We recommend either using the VEIL POTION or passing liquid through the nozzle tip at least once a month after opening.
When storing, keep the VEIL DIFFUSER upright in its stand.

VEIL POTION falls into dangerous goods concerning air transportation. Please contact the airline company for details.

Please contact the transporter for details.

Due to the product specification, some static electricity may be felt. This is the same kind of static electricity you may encounter in daily life, and there is no risk to safety. We confirmed that it doesn’t have any negative effects on the body.

The positive charge which the veil has gradually neutralizes after it attaches to the skin. It doesn’t cause any negative effects to the body. Please don’t worry.

We confirmed the veil keeps air permeability because the veil is formed by piling up ultra-thin fibers.

We recommend not to use on areas with pimples or inflammation, as is with general cosmetics products.

We confirmed safety of the product with the eyes. If the veil gets into the eyes, don’t rub the eyes and rinse immediately with plenty of water. If any symptoms persist, please consult your ophthalmologist.

If you don’t close the device cap correctly, the liquid may leak from the nozzle tip. After spraying, please ensure the device cap clicks closed and store it upright in the stand. In case you still can’t solve the problem, please contact the store where you purchased the product.

Please take the product to the shop for inspection and/or repair.

The applicator is made of NBR (nitrile rubber), and the surface is specially treated so that the sprayed veil easily adheres to the skin, optimised for BIOMIMESIS products.
The special treatment is a proven surface treatment method for make-up sponges, so it can be used safely.

The applicator is made from special surface-treated material, appropriate to be sprayed properly with the electrical VEIL DIFFUSER, and is of a size and shape that fits easily to areas such as under the eyes. It’s not possible to spray the veil properly or apply appropriately under the eyes with a general makeup sponge.

Wash using diluted neutral detergent by gently pressing with your fingertips. Rinse well then drain off excess water, and dry in the shade.
Avoid using hot water or soaking. Dry well before putting in a case.

Using the VEIL APPLICATOR with white lumps on the surface will not allow the veil to apply well.
When the veil dries in white lumps, first gently wipe off with an alcoholic wipe or similar, then wash with diluted neutral detergent, rinse well and dry.

If the VEIL APPLICATOR and the VEIL DIFFUSER are too close together, liquid droplets will come out without forming a veil.
If any liquid droplets land on the veil after spraying, the veil may melt, then dry in white lumps.
If liquid droplets stick to the veil, peel it off and start again.

If, for example, the veil won’t detach easily from the VEIL APPLICATOR, or if it becomes visibly unclean, you should wash it.

Wash off if it starts to become noticeable.

Lightly rub the surface with a tissue or similar to remove.

After washing, use after letting it dry, or after squeezing out most of the water.
(It’s possible to use while wet.)

Adjust to the size of the area you want to apply the veil on, and apply two times or more.

A cohesive veil will form by applying with the VEIL APPLICATOR first, then completing the spray process.
If the order is opposite, the veil may peel off.

Do not hold the VEIL APPLICATOR with your fingers. Lay it in your palm and spray the veil.

This product is designed so that the veil sprays on properly if the VEIL APPLICATOR is placed in one hand and the other hand holds the VEIL DIFFUSER while pressing the main switch. Always have the VEIL APPLICATOR in your hand while spraying.

When set to 1, the veil comes out little by little, meaning it more easily forms an even layer on the VEIL APPLICATOR.

・If the humidity is too high while using the device, it may not spray well, for example it may be difficult to aim or the veil may become flocced. We recommend an environment of between 15 and 35°C, and between 25 and 75% humidity.
・Only use when a sufficient amount of liquid has been dispensed while set to the droplet mark (or after cleaning the nozzle with the stick).
・Please use away from the effects of breeze, such as from an air conditioner.

Use for places like below the eyes, alongside your nose or your nasolabeal lines, where it is difficult to spray the veil on directly.
Do not use on places such as your eyelids or where hair is present (like your eyebrows) as application is difficult.

・It won't adhere to your skin if your skin is dry. Always apply the VEIL EFFECTOR first.
・If the surface of the VEIL APPLICATOR is unclean or there are leftover bits of veil stuck to it, it won’t apply well. Wash the VEIL APPLICATOR clean before using.
・The veil may remain on the VEIL APPLICATOR if it is not pressed against the skin sufficiently. Press the entire VEIL APPLICATOR evenly onto the skin, making sure that the veil is adhering well to the skin.

You can also use it to press on the veil to help it adhere to the skin after it’s been sprayed on. When doing so, press down from above without rubbing.

Use your own cosmetics in the same order as you would normally use them. Use the BIOMIMESIS VEIL series as the very final step of your care routine.

If the veil turns white and comes away from your skin, add some more VEIL EFFECTOR by patting on from above.

Reversing the order will make it more difficult to apply the veil to your skin with the VEIL APPLICATOR. Apply the veil with the VEIL APPLICATOR first, then spray directly onto your face.